Process pumps are a broad category of pumps used in many different industries to move fluids and semi-solids from point A to point B. Applications for these pumps include moving water, chemicals, mud, or other substances.
What does a process pump include?
While there are many types of process pumps, most have the same basic components. A typical system will include a prime mover, such as a gas-powered engine or an electrical motor. It may also include a gearbox, direct coupled or V-belt drive to help decrease the speed of the pump.
Two main types of process pumps
There are two main categories of process pumps. These are Positive Displacement and Kinetic or Centrifugal. Within each of these categories, there are a variety of different types of process pumps.
Positive Displacement Pumps
A positive displacement pump moves fluid through a pipe by first trapping a certain amount of the fluid and then forcing it through the pipe or outlet. This can be done using several mechanisms, including reciprocating pistons, gears, lobes, vanes, progressive cavity, or an air-operated double diaphragm.
Positive displacement pumps are considered constant or continuous flow machines since they move the fluid at a constant rate regardless of pressure. It is extremely important that these pumps do not operate against a closed valve, as this could damage the pipe. To prevent this from happening, there must be a relief or safety valve on the discharge side of the pump.
Kinetic or Centrifugal Pumps
Centrifugal pumps are used in situations that require high volume flows. Unlike positive displacement pumps that create a continuous flow (or head), centrifugal pumps have a varied flow that is controlled via elbows, bends, valves, etc. within the pipe. The type and size of piping can also influence the rate of the flow.
While there are a variety of centrifugal pumps, they all work by converting rotational kinetic energy into hydrodynamic energy. They do this by creating flow and pressure through a vaned impeller. While designs vary, all centrifugal pumps include a case, impeller, shaft, bearings, and seal.
Determining the correct process pump for your operation
Generally speaking, you would use a positive displacement pump when you wish to move more viscous liquids at lower flow rates, and you would use a centrifugal pump when you wish to move more watery liquids at higher flow rates. Although this is not a hard and fast rule, it is a good guideline to start with.
Other considerations in choosing the type and size of a process pump include the type of liquid being moved, its viscosity, temperature, and its specific gravity. You will also need to consider your flow and pressure requirements as well as the length, diameter, and type of piping.
How PFS Pumps can help
If you require a process pump for your operation to move a fluid or semi-solid, the experts at PFS Pumps can help you determine the right size and type of pump for you. Contact us today to schedule a consultation.